2014年2月11日星期二

ST0-148 exam study guide

In the information era, IT industry is catching more and more attention. In the society which has a galaxy of talents, there is still lack of IT talents. Many companies need IT talents, and generally, they investigate IT talents's ability in according to what IT related authentication certificate they have. So having some IT related authentication certificate is welcomed by many companies. But these authentication certificate are not very easy to get. Symantec ST0-148 is a quite difficult certification exams. Although a lot of people participate in Symantec ST0-148 exam, the pass rate is not very high.

Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Symantec certification ST0-148 exam. IT-Tests.com are able to provide you with test exercises which are closely similar with real exam questions.

If you choose IT-Tests, success is not far away for you. And soon you can get Symantec certification ST0-148 exam certificate. The product of IT-Tests.com not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service.

Exam Code: ST0-148
Exam Name: Symantec (Veritas Storage Foundation 6.0 for UNIX Technical Assessment )
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 109 Questions and Answers
Last Update: 2014-02-11

Many people think that passing some difficult IT certification exams needs to be proficient in much of IT expertise and only these IT personnels who grasp the comprehensive IT knowledge would be able to enroll in the exam. In fact, there are many ways to help you make up for your lack of knowledge, and pass the IT certification exams in the same. Perhaps you would spend less time and effort than the people who grasp fairly comprehensive expertise. The saying goes, all roads lead to Rome.

IT-Tests.com is a professional website. It can give each candidate to provide high-quality services, including pre-sales service and after-sales service. If you need IT-Tests.com's Symantec ST0-148 exam training materials, you can use part of our free questions and answers as a trial to sure that it is suitable for you. So you can personally check the quality of the IT-Tests.com Symantec ST0-148 exam training materials, and then decide to buy it. If you did not pass the exam unfortunately, we will refund the full cost of your purchase. Moreover, we can give you a year of free updates until you pass the exam.

I believe that a lot of people working in the IT industry hope to pass some IT certification exams to obtain the corresponding certifications. Some IT authentication certificates can help you promote to a higher job position in this fiercely competitive IT industry. Now the very popular Symantec ST0-148 authentication certificate is one of them. Although passing the Symantec certification ST0-148 exam is not so easy, there are still many ways to help you successfully pass the exam. While you can choose to spend a lot of time and energy to review the related IT knowledge, and also you can choose a effective training course. IT-Tests.com can provide the pertinent simulation test,which is very effective to help you pass the exam and can save your precious time and energy to achieve your dream. IT-Tests.com will be your best choice.

ST0-148 (Veritas Storage Foundation 6.0 for UNIX Technical Assessment ) Free Demo Download: http://www.it-tests.com/ST0-148.html

NO.1 Which virtual storage configuration can be created with Veritas Storage Foundation 6.0 for UNIX?
A. LVM
B. RAID
C. SVM
D. LPAR
Answer: B

Symantec braindump   ST0-148 test answers   ST0-148   ST0-148 practice test

NO.2 Veritas File System (VxFS) is an extent based file system. Which two pieces of information form the
basis of an extent? (Select two.)
A. inode number
B. offset
C. length
D. owner's UID
E. block size
Answer: B,C

Symantec original questions   ST0-148 questions   ST0-148 exam simulations

NO.3 An administrator needs to move all data volumes and disks in diskgroup appdg into an existing
diskgroup named webdg. The end result will yield one diskgroup on the system: webdg. Which command
should the administrator use to move the data volumes?
A. vxdg move appdg webdg
B. vxdg split appdg webdg
C. vxdg join appdg webdg
D. vxdg add appdg webdg
Answer: C

Symantec certification   ST0-148 dumps   ST0-148 practice test   ST0-148

NO.4 A user creates a 10MB file, which is then compressed using vxcompress to reduce the file size to 1MB.
Another user copies this file to a different Veritas File System (VxFS) on the same host using cp. What is
the resulting file size of the copy?
A. 1MB
B. 9MB
C. 10MB
D. 11MB
Answer: C

Symantec   ST0-148   ST0-148 test answers

NO.5 Which command line utility is used to view Veritas Volume Manager (VxVM) plexes?
A. vxdisk
B. vxdg
C. vxplex
D. vxprint
Answer: D

Symantec practice test   ST0-148 test   ST0-148   ST0-148   ST0-148 test answers

NO.6 What is the default private region size for Veritas Volume Manager (VxVM) disks?
A. 8MB
B. 16MB
C. 32MB
D. 64MB
Answer: C

Symantec test questions   ST0-148   ST0-148

NO.7 Which command resizes the file system without changing the volume size?
A. tunefs
B. vxresize
C. fsadm
D. vxfsadm
Answer: C

Symantec   ST0-148   ST0-148 test answers   ST0-148   ST0-148 exam

NO.8 A Veritas Volume Manager (VxVM) disk named Disk_4 has been removed from the datadg disk group.
Which command is used to remove this disk from Veritas Volume Manager (VxVM) control?
A. vxdisk -g datadg rmdisk Disk_4
B. vxdiskunsetup Disk_4
C. vxdg -g datadg rmdisk Disk_4
D. vxdisksetup -r Disk_4
Answer: B

Symantec exam prep   ST0-148   ST0-148   ST0-148 test questions   ST0-148 answers real questions

NO.9 What enables combining disks or LUNs into logical collections to make administration easier?
A. volume
B. plex
C. subdisk
D. disk group
Answer: D

Symantec   ST0-148   ST0-148 test   ST0-148 certification training   ST0-148   ST0-148 braindump

NO.10 An administrator plans to move disks EMC_11 and EMC_12 from diskgroup appdg to diskgroup webdg.
There are several volumes residing on both disks, so the administrator needs a list of volumes that will be
affected for planning purposes. Which command should the administrator use to generate the list?
A. vxdg listclone appdg webdg
B. vxdg listmeta EMC_11 EMC_12
C. vxdg list appdg webdg
D. vxdg listmove appdg webdg EMC_11 EMC_12
Answer: D

Symantec   ST0-148 practice test   ST0-148 dumps   ST0-148

NO.11 Which two conditions are applicable to disks of a disk group that have been destroyed with the vxdg
destroy command without re-deploying the disks? (Select two.)
A. The destroy operation retains the on-disk disk group ID, which makes the disk group recoverable.
B. The destroy operation clears the on-disk disk group ID, which makes recovery impossible.
C. The destroy operation clears the on-disk disk group name and makes disks available for use in other
disk groups.
D. The destroy operation clears the on-disk disk group name and re-initializes all of the disks.
E. The destroy operation deports the disk group and re-formats all of the disks.
Answer: A,C

Symantec   ST0-148   ST0-148 answers real questions   ST0-148 answers real questions

NO.12 A system with a single, locally mounted file system loses power and is subsequently restarted. All
hardware is functioning properly and the intent log is valid. The administrator then mounts the file system
using the mount command. What is the expected behavior.?
A. Mount will replay the intent log.
B. Mount prints an error stating that a fsck log replay will be required.
C. Mount succeeds silently as normal.
D. Mount prints an error message stating that a full fsck will be required.
Answer: A

Symantec exam simulations   ST0-148 braindump   ST0-148 questions

NO.13 Which region stores the information that manages virtual devices when a LUN is brought under Veritas
Storage Foundation 6.0 for UNIX control?
A. private region
B. VTOC region
C. virtual region
D. public region
Answer: A

Symantec   ST0-148   ST0-148   ST0-148

NO.14 The disk group appdg is imported onto host01 using the vxdg -t import appdg command. Volumes
have been started and file systems mounted. The system is then gracefully rebooted. What happens to
the appdg disk group after host01 has restarted?
A. The appdg disk group is automatically imported; all volumes in the disk group are automatically started.
B. The appdg disk group is automatically temporarily imported; all volumes in the disk group are
automatically started.
C. The appdg disk group remains deported; only host01 can import the disk group using the vxdg import
appdg command.
D. The appdg disk group remains deported; any host that can access the appdg disk group can import it.
Answer: D

Symantec study guide   ST0-148   ST0-148 certification training   ST0-148   ST0-148

NO.15 Which command can an administrator use to display the bsize and logsize used on an existing file
system?
A. mkfs
B. fsadm
C. mount
D. fsmap
Answer: A

Symantec   ST0-148   ST0-148   ST0-148 study guide

IT-Tests.com offer the latest 000-283 Questions & Answers and high-quality 1Z0-511 PDF Practice Test. Our 70-463 VCE testing engine and 700-302 study guide can help you pass the real exam. High-quality HP2-N44 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/ST0-148.html

没有评论:

发表评论